 Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This ladies' watch was made by the Elgin Watch Company. The signed dial is in very good condition as are the raised gold numbers and minute and hour hands. The acrylic crystal appears to be new and is in excellent condition. The stem functions properly. The movement is also signed ELGIN 541 U.S.A. It has 15 jewels. The serial number is C831144 which dates the watch to 1944. The balance staff appears to be fine and the watch runs and stops. The inside of the case back is stamped CASED AND TIMED BY ELGIN NATIONAL WATCH CO. 10K GOLD FILLED. The serial number on the case is 487955. The case and back are in very good condition. The grade of this watch is 541 and it is a size 21/0s. (999-400) Price - $65 Refer to: #SM164 This is an assortment of parts that are vintage clock feet or new old stock door knobs to be used in restoring clock feet. There is a set of four original brass feet for an anniversary clock, a set of four original brass ball feet, a set of four small gilded feet for an iron clock, and an array of miscellaneous metal and wooden feet and knobs. The smallest metal feet measure 7/16" in diameter and the largest wooden knob is 1 3/4" in diameter. (999-595) Price - $25 Refer to: #P171 This is a genuine Bulova waterproof acrylic watch crystal. It is a snap-in type, dome, Spaceview Yellow. It is new old stock and in excellent condition. The crystal is stamped ACCUTRON and the minute markers and emblem are also in excellent condition. It still retains the original sticker on the crystal, designating the size at 30.55mm. It comes in its original paper sleeve marked 1210E-3. (699-400) Price - $45 Refer to: #SM206 This is a balance staff for an Illinois 18s pocket watch movement. It is new old stock in excellent condition. It was inventory from a retired watchmaker's shop. (699-400) Price - $30 Refer to: #SM176 This is a 1-Day Regula musical cuckoo clock movement. It is model 25/1-F and is used for clocks that have dancers that turn while the music plays. The plate size is 2 7/8" high and 2 7/8" wide. The distance from the top of the hand shaft to the dancer table is 2 3/4". The pendulum length required is 9 1/4". Included with the movement are three new chains, rings and hooks. Also the minute hand bushing, washer and handnut. This lot is new old stock and in excellent condition. (6999-1095) Price - $95 Refer to: #P167 This is a micro-mini quartz movement made in Germany. There is a rear hand set knob. It measures 2 1/8" in diameter and 5/8" in depth. The overall shaft length is 1/4" and the shaft diameter is 3/16". There are three mounting holes for screws and the hour and minute hands are included. Hands may vary from those in the photo. It requires an N battery, which is not included. The movement is new old stock and in fine condition. (199-4) Price - $5 Refer to: #P128 The dial of this calendar watch is signed ELGIN SPORTSMAN. It is in good condition with some wear. The minute and hour hands and seconds sweep are present. The stem functions properly but the crown is not present. The dial foot at the 2:00 position is not present. The calendar function appears to advance correctly. The movement is stamped M136 and has 17 jewels. The balance staff appears to be fine and the watch is currently running but has not been tested for accuracy or duration. It is being sold for parts or restoration. The dial plate measures 25.75mm in diameter. (699-400) Price - $45 Refer to: #SM199 This is an assortment of 12 antique skeleton keys. The hallmarked keys are R & E MFG. CO.; ? New Britan, Conn, USA; BRANFORD; Norwalk Lock Co.; and PENN. Some of the hallmarked keys have patent dates of 1870, 1888 and 1889. Some of the keys have a very nice patina while others would benefit from a good cleaning. They were used for doors, cabinets, hall clock cases, etc. Seven have handles or shafts that are slightly bent from years of turning the key in the lock. (999-595) Price - $45 Refer to: #P213 This is an assortment of six original antique and vintage wood finials for clocks, furniture, et al. Left and right are matching pairs. The smallest finials measures 2 1/2" (right pair) and the largest finial measures 4" (top center). All of the finials are in very good condition. There are mahogany and walnut-stained finials, all with attractive patinas. (1999-765) Price - $35 Refer to: #P239 The dial on this watch is signed OMEGA SWISS MADE. It is in good condition with some wear and would benefit from a thorough cleaning. The minute and hour hands are present. The movement has a fair amount of corrosion, especially around the stem and balance wheel areas. The balance staff is broken and the mainspring is not present. The watch is being sold for parts or restoration. The movement has 17 jewels and is signed OMEGA WATCH Co. SWISS. It is a caliber 483 and the serial number is 18763246. Also included is a good balance staff which appears to be for this movement. Also two stems, a small gear and a portion of the mainspring for measuring purposes. (699-400) Price - $45 Refer to: #SM154 This is a complete balance assembly for a Hamilton caliber 911 watch. It is in excellent condition. This is inventory from a retired watchmaker's shop. (699-400) Price - $55 Refer to: #SM177 This lot is for three watches and are being sold for parts or restoration. 1) The watch on the upper right is Swiss made. The dial is signed FREY 15 JEWELS SWISS MADE. It is in overall good condition. The minute and hour hands are present. The stem functions properly. The movement is stamped SWISS. The balance staff appears to be broken and the hairspring may be broken as well. The back of the case is stamped ALUMINUM MODELE DEPOSE and has the number 10193-2. 2) The watch at the bottom is also Swiss. It is signed ENGELTON WATCH Co. It has 17 jewels and is unadjusted. The balance bridge has the initials JXE. There is rust in the movement and the hour gear is not present. The stem is present but does not function properly. 3) The watch on the top left is unsigned. The dial is in excellent condition as are the blue steel minute and hour hands. The movement has a broken balance staff. The stem will need adjusting as the hands turn whether it is in the set or wind position. The silver case shows some wear and has the initials ASP on the inside back cover. The cystal is in very good condition. (699-400) Price - $25 Refer to: #SM133 The dial of this watch is signed WITTNAUER. It shows some wear and would benefit from a cleaning. The minute and hour hands and seconds bit are present and in good condition. The stem functions properly. The movement is also signed WITTNAUER WATCH Co. INC SWISS. It has 17 jewels. The letters AXA are stamped on the back movement plate. Also stamped on the plate is 84/1 REVUE. There is some corrosion present and the movement would benefit from a thorough cleaning. The watch is currently running but has not been tested for accuracy or duration. The movement measures 25.5mm in length and is 17.5mm wide. (699-400) Price - $65 Refer to: #SM172 This is an assortment of 40 paper dials. They are various sizes and styles, ivory and white, arabic and roman, trademarks and plain, calendar, seconds and dial mask replacements. They range from 3" to 7". Not all the dials appear in the photo. They are new old stock and are in excellent condition. (999-1095) Price - $20 Refer to: #P199 This is an assortment of ten watch or pocket watch balance wheels. They vary in diameter. Six have balance staffs which are either bent or broken. The remaining four are the wheels only. This is a nice variety of wheels to have on hand in the repair shop. (699-400) Price - $55 Refer to: #SM120 This Swiss watch was made by the Camy Watch Company. The dial is signed Lord Carlton 17 JEWELS. It is in good condition with some wear and would benefit from a thorough cleaning. The gold minute and hour hands are present but the seconds bit and stem are not. The movement is signed CAMY WATCH Co SWISS. It has 17 jewels. The balance staff is broken and the watch is being sold for parts or restoration. The movement measures 19.4mm in diameter. (699-400) Price - $25 Refer to: #SM169 This brass crank is used to wind grandfather clocks or weight driven wall clocks. It was made by Urgos and is stamped with their trademark on the handle. It is in very good condition. The wood handle rotates smoothly and the winding end has no cracks or splits. It is a size 7. (699-595) Price - $15 Refer to: #P224 This is a genuine Bulova waterproof acrylic watch crystal. It is for an Accutron and is designated as a Boudoir Clock Crystal. It is new old stock and in excellent condition. The crystal still retains its original sticker designating the size at 29.7mm. It comes in its original paper sleeve marked 1281E. (699-400) Price - $45 Refer to: #SM217 This is an old beveled glass with an arch top that can be used in a clock door or a picture frame. It is in excellent condition except for some rough edges that will be covered by the door or frame. The bevel measures 3/16". The glass measures 6" in length and 4 3/8" in width. (1499-595) Price - $35 Refer to: #P206 This lot is a spring set lever for a Hamilton Caliber 987 watch. It appears to be new old stock in excellent condition. This is inventory from a retired watchmaker's shop. (699-400) Price - $25 Refer to: #SM186 This is a balance staff for an Elgin 16s pocket watch. It measure 5.32mm in length. It is new old stock and in excellent condition. This is inventory from a retired watchmaker's shop. (699-400) Price - $45 Refer to: #SM181 This Swiss pocket watch is signed CERVINE on the white porcelain dial. The dial is in very good condition with some wear and minor chipping along the outside edge. The blue steel minute hand and seconds bit are also in very good condition. The hour hand and stem are not present. The movement is signed HIRSCH SWISS. It has seven jewels and one adjustment. The balance staff is broken and several teeth on the escape wheel are damaged. The watch is being sold for parts or restoration. The dial plate measures 29.55mm in diameter. (699-595) Price - $55 Refer to: #SM183 This Swiss watch movement is signed EMPIRE WATCH Co. It has 17 jewels and is stamped with the letters EXO. The hour wheel, stem, and stem gear assembly are not present. The balance staff is broken and the watch is being sold for parts or restoration. The dial plate measures 19.7mm in diameter. (699-400) Price - $15 Refer to: #SM168 This is a center wheel for a LeCoultre 19L Cal 218 movement. It is used but in excellent condition. (699-400) Price - $25 Refer to: #SM123  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This is an assortment of watchband parts, a new watchband and two watch cases. The box of parts is primarily an assortment of Speidel watchband links both gold and silver. The new watchband is a ladies' x-large Twist-O-Flex Speidel and is a yellow antique. It is new old stock and in excellent condition. It comes in the original case with the price tag of $8.95. It measures 6" in length and is 1/4" wide. The top caps are 1/20 K.G.F. The mens' watch case on the left is in good condition. The crystal is not present. The inside back cover is stamped BREV.+ No.189190 RUSTLESS STEEL SCHMITZ SWISS 9460. The ladies' watch case on the right was made by the Hamilton Watch Co. in Lancaster, PA. It has a stainless steel back and the bezel is 10K R.G.P. The crystal is present and the case is in very good condition. (699-595) Price - $25 Refer to: #SM147 This movement is signed AMERICAN WALTHAM WATCH Co. The movement is also stamped SAFETY PINION. The white porcelain dial has several hairline cracks and a couple of ships. The most significant of these is just above the seconds dial near the 5 seconds position. The black numerals, minute markers and dial signature are in very good condition. The dial is signed Am. Watch Co. WALTHAM. There are no hands or stem. The balance staff is broken and there is no hairspring. The serial number is 3721404 which dates the watch to 1887. The dial plate measures 30.62mm. (999-400) Price - $55 Refer to: #SM094 This double end clock key is for a Seth Thomas shelf or mantel clock. It is a new reproduction key with the Seth Thomas logo stamped on one wing. It is in excellent condition with no cracks or splits. The wing is tight to the shaft. The winding end measures 4mm, a size 7. The fast and slow end measures 1.75mm, a size 000. (699-400) Price - $10 Refer to: #P233 This is curved beveled glass for a clock door or project. It is new old stock. It is in excellent condition with no chips, breaks or cracks. The bevel measures 3/8". It measures 5 3/4" in width and measures 4 7/8" in length at the edge and 3 5/16" at the center. (1299-595) Price - $25 Refer to: #P205 This is an antique Waltham watch. The gold leaf dial is in good condition with some wear above the minute shaft. The black WALTHAM signature, numbers and minute markers are also in good condition. The minute and hour hands are not present but the seconds bit is there. There is no stem. The movement is signed A.W.W.Co. WALTHAM, MASS. It has 15 jewels. The serial number is 19135530 which dates the watch to 1913. The balance staff appears to be fine but is too tight when the bridge is screwed down. The hairspring appears to need adjusting. The roller and one of the verge bridge screws is not present. The watch is being sold for parts or restoration. The movement measures 28mm in diameter. (699-400) Price - $45 Refer to: #SM142 This lot is an assortment of three clock wind-up keys. They are new old stock and in excellent condition. The key on the left is a double end #4 and is stamped INDIA. The winding side measures 3mm and the fast and slow side measures 1.6mm. The brass key in the center is stamped 12. It measures 5.25mm and is a single end. The key on the right is a double end #6. The winding end measures 3.5mm and the fast and slow end measures 2.25mm. (699-400) Price - $12 Refer to: #P240 This watch movement is signed A.LECOULTRE SWISS. It is also stamped BLANCPAIN. The minute and hour hands and hour wheel are not present. The stem functions properly. The watch has 15 jewels and 3 adjustments. It is currently running but has not been tested for accuracy or duration. The front movement plate is stamped with the numbers 457. It measures 22.5mm in length and is 13mm wide. (699-400) Price - $45 Refer to: #SM180 This black dial calendar watch is signed Pierre Chevelle 17 JEWELS SHOCKPROTECTED WATERPROOF FRANCE. The dial is in good condition with some wear. The minute and hour hands and seconds sweep are present but the stem is not. The movement is signed CONTINENTAL TIME Co INC FRANCE. The barrel wheel is stamped "RELIANCES". The balance staff appears to be fine but the watch is not currently running. There is some corrosion around the outside edge and front plate. It is uncertain if all parts are accounted for although the movement looks complete. Without the stem, the calendar function has not been tested. It is being sold for parts or restoration. The dial plate measures 26mm in diameter. (699-400) Price - $35 Refer to: #SM194 These cuckoo clock bellow tops are generally used on 8-day clocks. They have different paper on top indicating they did not start out together. They do, however, match in size and can be used as a pair. The green bellow top is older than the yellow one. Tape has been added, at some point in the past, to cover a slight tear on the back edge. They are in good condition and open and close properly. Both are 1 3/4" long and 1 3/4" wide. (699-400) Price - $12 Refer to: #P226 This is a genuine Bulova waterproof acrylic watch crystal. It is a snap-in type, dome, Spaceview Luminous. It is new old stock and in excellent condition. The crystal is stamped ACCUTRON and the minute markers and emblem are also in excellent condition. It measures 29.0mm. It comes in its original paper sleeve marked 1220E. (699-400) Price - $45 Refer to: #SM211 This watch movement is signed LONGINES WATCH Co. SWISS. It has 17 jewels and is stamped 9L and the letters LXW. The balance staff is broken and the barrel wheel retaining screw and click assembly are not present. The serial number is 5622710 which dates the watch to 1937. The front of the plate is stamped LONGINES WITTNAUER. The minute and hour hands and seconds bit are present but the stem and stem linkage are not. The watch is being sold for parts or restoration. The movement measures 17.9mm wide and is 26.5mm long. (699-400) Price - $30 Refer to: #SM195 This Swiss watch was made by the Military Watch Company. The dial shows wear and would benefit from a thorough cleaning. The MILITARY signature is in very good condition. The dial is also stamped ANTIMAGNETIC WATER-RESISTANT 17 JEWELS SWISS. The minute and hour hands are present but the seconds bit is not. The stem functions properly. The movement is signed MILITARY WATCH Co. SWISS. It has 17 jewels and the letters MOY are stamped on the balance wheel bridge. The balance staff is broken. The dial plate measures 23.7mm in diameter. (699-400) Price - $35 Refer to: #SM170 This platform escapement is for an antique carriage clock. It is in good condition. The balance staff is broken. The bottom is stamped with the numbers 97. It measures 41.5mm in length and is 29.4mm wide. (999-665) Price - $55 Refer to: #SM209 This floating balance is from a Hermle clock movement. It has been used but is in very good condition. The balance oscillates smoothly and functions properly. The spring and wire appear to be fine. It mounts to the movement with two nuts (not included) rather than the more common screw mounted style. It is 1 3/4" high and 1 1/2" wide. (699-665) Price - $35 Refer to: #P241 This ladies' watch was made by the Elgin Watch Company. The signed dial is in very good condition with some wear. The blue steel minute and hour hands are also in very good condition. The stem functions properly. The movement is also signed ELGIN 702 U.S.A. It has 17 jewels and is adjusted. The balance staff appears to be fine but the watch is not currently running. The movement measures 16mm in length and is 13.3mm wide. (699-400) Price - $55 Refer to: #SM185  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This lot is for an assortment of four watchbands, four crystals, four watch springs and a case of spring bars. The two watchbands at the top come with their original cases and price tags. Both are made by Speidel and are new old stock. The mens' gold band is a Twist-O-Flex Jr. The top caps are 10K Gold Filled and the bottom caps are stainless steel. It is a size medium and measures 4 1/2" long and 1/2" wide. It is in excellent condition. The new ladies' gold watchband is also a Twist-O-Flex model and is a yellow antique. It measures 5 3/4" in length and is 1/4" wide. The top caps are 1/27 10K R.G.P. The ends are 1/50 10K R.G.P. and the bottoms are stainless. It is in excellent condition. The third band is silver in color and made by Airflex. It is stainless steel and in very good condition. The links open and close smoothly. It is 5 3/8" in length and 1/4" wide. The fourth watchband is also silver and in very good condition. It is 5 1/2" long and 1/8" wide. Its links also open and close smoothly. The four acrylic watch crystals are new old stock in excellent condition. They vary in size as follows: 174mm, 236mm, 330mm and 352mm. Three are high-domed waterproof. The four watch main springs were made by Rudolf Flume and are new old stock. The size designations on the side of the box are two springs at 1302 1.60 8.0 0.09. The other two springs are 1326 1.60 10.5 0.12. The case of spring bars contains nearly 150 pieces. They are ~7/8" long and are new old stock in excellent condition. (699-595) Price - $30 Refer to: #SM163 This is a set of two wood oil stands used to hold watch and clock oilers. They are in excellent condition with no splits, cracks or chips. They are 1 1/2" high. The base on both stands measure 1 1/2" in diameter. (699-480) Price - $15 Refer to: #SM205 This is an original antique brass back cover for a shelf or mantel clock. It is in very good condition and opens and closes properly. The glass has a 1/4" bevel and is in excellent condition. The outside overall diameter measures 4 1/2". It requires a case opening of 4 1/8" for the inside ring to seat properly. The inside rim is stamped with the numbers 5759. (1499-595) Price - $35 Refer to: #P232 This assortment is for three watch movements. (1) The watch on the bottom is Swiss and the movement is signed BENRUS WATCH Co INC. It has 17 jewels and is model ER 23. The balance staff appears to be broken and there is some rust on the front plate. Several parts are dissassembled from the movement and it is uncertain if all parts are present. The dial plate measures 26.0mm in diameter. (2) The watch on the top right is also Swiss and was made by Vanburen. The dial is signed VANBUREN and is in overall very good condition with some wear. The blue steel hands are also in good condition. The movement has 15 jewels, is AA Grade and has 2 adjustments. It is signed VANBUREN WATCH Co. The stem is present but when pulled, comes out of the movement and will require adjustment. The watch will run for several minutes before stopping. (3) The watch on the top left is also Swiss and was made by the Benrus Watch Company. The dial shows some wear and is signed BENRUS SHOCK ABSORBER SWISS. The minute and hour hands are present but the seconds bit and minute wheel are not. The movement is also signed BENRUS WATCH Co. It is Model AR 1 and has 17 jewels and is unadjusted. The letters CXW are stamped on the balance wheel bridge. The balance staff is broken. The dial plate measures 23.65mm in diameter. All three watches are being sold for parts or restoration. (699-400) Price - $25 Refer to: #SM100 This is a balance staff for a Longines Cal 9LT watch. It is in excellent condition. It was inventory from a retired watchmaker's shop. (699-400) Price - $25 Refer to: #SM145 This is convex oval glass for a wall clock door or picture frame. It is in excellent condition with no chips, breaks or cracks. The glass edge is slightly rough which is normal and will not affect the overall appearance. It measures 13" in length and 9" at its widest point. (699-595) Price - $12 Refer to: #P210 The dial of this ladies' watch is signed WITTNAUER SWISS. It has some wear and scratches and would benefit from a thorough cleaning. The minute and hour hands and seconds sweep are present but the stem is not. The movement is also signed WITTNAUER WATCH Co. INC SWISS. It has 17 jewels and is stamped with the letters AXA. The balance staff appears to be fine and the watch runs and stops. It is a caliber 6NS7G1. (699-400) Price - $45 Refer to: #SM175 The dial of this watch is signed WARWICK SWISS. It is in good condition with some wear and would benefit from a cleaning. The blue steel minute and hour hands are also in good condition. The stem is present. The movement is signed Warwick W. Co. 4S SWISS. It has 17 jewels and 2 adjustments. The balance staff appears to be fine but a pivot on the escape wheel appears to be broken. The watch is being sold for parts or restoration. It measures 19.46mm in length and is 12.3mm wide. (699-400) Price - $20 Refer to: #SM165 This is a U.S. made Takane thin mini quartz movement with 16" adjustable pendulum rod, three pendulum bobs, minute and hour hands, mounting hardware and hanger. The pendulum bobs measure 3 1/2", 2 3/4", and 2 1/8". The bobs have the original protective cellophane coverings which the photo may show as having scratches, but once removed, the bob is perfect. There is a rear hand set knob. The movement has the standard "I" hand shaft, which is 3/4" overall length and 5/16" in diameter. The movement is time only and requires AA batteries, which are not included. This complete movement set is new old stock and in fine condition. (499-565) Price - $10 Refer to: #P139 The dial of this watch is signed ELGIN. It is in very good condition and would benefit from a thorough cleaning. The blue steel minute and hour hands are present but the seconds bit and stem are not. The movement is signed Elgin U.S.A. The serial number is 31698646 which dates the watch to 1927. It has 7 jewels. The balance staff is broken and the mainspring is either broken or not present. The grade of this watch is 462 and it is a size 3/0s. (699-400) Price - $35 Refer to: #SM166 The dial of this watch is signed WITTNAUER REVUE. It is in good condition with some wear and would benefit from a cleaning. The minute and hour hands and seconds bit are present and in good condition. The stem functions properly. The crown is not present. The movement is also signed WITTNAUER INC WATCH Co SWISS. It has 17 jewels. The letters AXA are stamped on the back movement plate. Also stamped on the plate is 76 REVUE. The watch is currently running but has not been tested for accuracy or duration. The dial plate measures 23.5mm in diameter. (699-400) Price - $65 Refer to: #SM174 This is an assortment of 12 pieces of Horolovar temperature compensating steel springs for making suspension springs for 400-Day clocks. It is an assortment of popular strengths. Not sure if the strengths match the particular slot that the springs are in. The occupied slots are .048mm(2), .053mm(1), .056mm(2), .071mm(1), .079mm(1), .084mm(1), .091mm(2) and .114mm(2). Price - $15 Refer to: #P094 This Swiss watch was made by Paul Ditisheim. The silver dial is in good condition with some wear. The blue steel minute and hour hands are in very good condition. The stem functions properly. The movement is signed PAUL DITISHEIM SOLVIL SWISS. It has 17 jewels and 4 adjustments. The serial number is 375141. The watch is currently running but has not been tested for accuracy or duration. The movement measures 26.2mm in length and is 14.6mm wide. (699-400) Price - $45 Refer to: #SM179 This pocket watch was made in London at the Royal Exchange. The maker's name was French. The white porcelain dial has a few minor chips and hairline cracks but is in overall good condition. The black numerals and time track are also in good condition. The seconds dial is slightly recessed. The hands are not present. There are two dial feet at the 2:00 and 8:00 positions. The beautifully engraved movement is signed FRENCH ROYAL EXCHANGE LONDON. It is wound and set with a key, however, the key is not present. Access to the escapement is gained by releasing a catch on the edge of the movement. The balance staff appears to be fine and the watch is currently running but has not been tested for time keeping or duration. The front plate is stamped with the name C. VARGES and the numbers 191. The dial plate measures 40.66mm in diameter. The watch is being sold for parts or restoration. (999-595) Price - $150 Refer to: #SM098 The dial of this watch is signed OMEGA Seamaster ANTIMAGNETIC MODEL EXSPORT. The dial is in very good condition. The minute and hour hands and seconds bit are present and also in very good condition. The stem functions properly. There is some corrosion around the end of the stem and the crown is not present. The movement has 17 jewels. The OMEGA signature on the barrel wheel is faint but legible. There is no serial number present. Therefore, it is uncertain if this dial started out with this movement. The balance staff appears to be fine and the watch is currently running but has not been tested for accuracy or duration. It is being sold for parts or restoration. The movement measures 23.25mm in diameter. (699-400) Price - $85 Refer to: #SM189  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This assortment is for ladies' watchband parts and two cases. The black container is made up of a wide array of vintage silver links, clasps and catches. The three watchbands are new old stock and in excellent condition. The silver band has its original price tag of $3.75. It measures 5" in length and is 5/16" wide. A back link is stamped MARK VII 1/20 10K G.F. TOP MADE IN U.S.A. The links open and close smoothly. The second band is made by CHIC and is leather. The original price tag of $2.00 is still present. It measures 5 1/2" at its longest setting and is 3/8" at the widest point. The third watchband is made by Town & Country and is no. 180. It is still in its original packing with a price tag of $1.00. This nylon band measures 8" in length and is 3/8" wide. The box of spring bars are 1/4" long and are the double shoulder type. There are over 175 pieces included. The two watch cases also appear to be new old stock. They were both made by the Hamilton Watch Co. in Lancaster, PA. They have stainless steel backs and the bezels are 10K R.G.P. One has a crystal and the other does not. Both cases are in excellent condition. (799-595) Price - $25 Refer to: #SM056 This is a U.S.A made Takane thin mini quartz movement. There is a rear hand set knob. It has a convenient on/off switch. The movement has the standard "I" hand shaft, which is 5/16" overall length. The movement is time only and requires 1 AA battery, which is not included. The movement measures 2 1/4" x 2 1/4" x 5/8" and is new old stock in fine condition. It includes mounting hardware, hour and minute and seconds sweep hand and hanger. (299-565) Price - $8 Refer to: #P118  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This is an assortment of three gold charm bracelets and the original vintage display card for jewelry stores. All three were manufactured by the American Jewelry Chain Co. of Providence, Rhode Island. Each of these vintage bracelets is gold-filled, is a single-linked chain and measures 7 1/4" in length. They are new old stock and are in fine condition. The clasps are in good working order and each is hallmarked "1/20 12K." The display card originally held 12 charm bracelets with a variety of the sterling silver models. The display is a thick cardboard with a mat of blue-green felt. The board does show some wear but still displays very nicely. On the back of the board is a photo illustrating several of the bracelets included in this assortment, but in sterling silver. Two of the chains being sold in this assortment, the one in the center and the one to the far right, are pictured on the left side of the Company's illustration. (999-550) Price - $25 Refer to: #SM048 This assortment includes six precision oilers. They are Swiss made by Bergeon. They have standard plastic handles. The different colors represent different size tips. The blue are medium, the yellow are extra-large, the green is large and the black is extra-fine. All the tips are in very good condition. (999-480) Price - $12 Refer to: #SM218 This is a lot of 2 glass tablets for antique kitchen or parlor clock doors. There are bubbles in both glasses. The tablet on the right is the original transfer and slightly worn. The tablet on the left is a decal that has worn off in areas and could be replaced. This tablet measures 12 3/4" in length and 6 3/8" in width. The tablet on the right measures 12 9/16" in length and 6 3/8" in width. (1499-15) Price - $30 Refer to: #P152 The dial of this watch is signed BULOVA SWISS. It shows some wear and would benefit from a cleaning. The blue steel minute and hour hands are in good condition. The stem functions properly. The movement is also signed BULOVA WATCH Co SWISS. It has seven jewels and is model 4AF. The balance staff is broken. The movement measures 25.8mm in length and is 11.2mm wide. (699-400) Price - $25 Refer to: #SM162 This is a genuine Bulova waterproof acrylic watch crystal. It is for an Accutron and is a Spaceview Armored White. It is new old stock and in excellent condition. The crystal is stamped ACCUTRON and the signature and emblem are also in excellent condition. It measures 32.7mm. It comes in its original paper sleeve marked A1270EW. (699-400) Price - $45 Refer to: #SM210 This is an assortment of two pendulum bobs for regulator and wall clocks. The bob on the left is in very good condition with minor wear. It measures 4 1/2" in diameter and weighs 4 1/4 oz. The bob on the left is also 4 1/2" in diameter and weighs 4 1/4 oz. The brass finish has deteriorated but uniformly. (999-595) Price - $15 Refer to: #P163 This lot is for an assortment of clock bezel parts. Four of the items are inside bezel rings. Their sizes include one at 5", one at 5 1/2" and two at 5 3/4". A fifth item is a glass retaining ring measuring 6 1/8" in diameter. There is an inner dial bezel that measures 2 3/8". There are two outside bezel rings which are 4 5/8" and 5" in diameter. There is one complete bezel that is 4 3/8" in diameter that was used on Seth Thomas shelf clocks. The inside diameter that fits into the case opening measures 4" in diameter. The hinge pin on the bezel needs tightening. All these parts are in good condition and would be valuable assets in the workshop. (999-1095) Price - $35 Refer to: #P197 The silver dial of this Swiss watch is in good condition but would benefit from a thorough cleaning. The blue steel minute and hour hands are present but the stem is not. The movement is signed CHAMP W. CO SWITZERLAND. It has 15 jewels and 3 adjustments. The balance staff appears to be fine and the watch runs and stops. It is being sold for parts or restoration. The dial plate measures 19.7mm in diameter. (699-400) Price - $35 Refer to: #SM151 This is a balance staff for a Rolex 10 1/2 Hunter watch. It is in excellent condition. It was inventory from a retired watchmaker's shop. (699-400) Price - $30 Refer to: #SM157 This is a set of two plastic oil stands used to hold watch and clock oilers. They are in excellent condition with no splits or cracks. They are 1 1/8" high. The base on both stands measure 1 3/8" in diameter. (699-480) Price - $10 Refer to: #SM214 This is an assortment of 12 antique skeleton keys. Some have a very nice patina while others would benefit from a good cleaning. They were used for doors, cabinets, hall clock cases and the like. Three have handles or shafts that are slightly bent. They are in good condition. (999-595) Price - $45 Refer to: #P200 This watch was made by the Waltham Watch Company. The dial is in very good condition with some wear. It is signed WALTHAM 17 JEWELS SELFWINDING SHOCKRESISTANT. The minute and hour hands and seconds sweep are present and in good condition. The stem is present and functions properly in the set position but not in the wind position. Adjustment or repair will be required to the stem or linkage. The movement is signed WALTHAM WATCH CO. It is also stamped 33UT. The balance staff appears to be fine and the watch is currently running but has not been tested for accuracy or duration. It is being sold for parts or restoration. The dial plate measures 28mm in diameter. (699-400) Price - $65 Refer to: #SM187 This is a cast iron antique alarm weight for wall clocks. It is gold enamel with a considerable amount of patina. The hook is tight and solid. It weighs 1 lb. 11 oz. It measures 3 5/8" in length and is 1 5/8" in diameter at the bottom. (699-595) Price - $10 Refer to: #P211 This lot is an assortment of watch springs and crystals. The two acrylic crystals are new old stock and in excellent condition. They were made by Rudolf Flume. One is size 334 and the other is 470. The Elgin main spring is also new old stock. It is for a size 8/0. The box three main springs were made by Rudolf Flume and are new old stock. The size designations on the side of the box are 1396 1.70 10.0 0.12. (699-400) Price - $25 Refer to: #SM127 This is an original antique beveled glass for a carriage clock or picture frame. The bevel measures 3/8". There are two chips; one on the top right corner and one on the bottom right corner. Otherwise, the glass is in very good condition. It measures 4 3/8" in length and 3 3/16" in width.(999-595) Price - $15 Refer to: #P208 This is a genuine Bulova waterproof acrylic Accutron watch crystal. It is a press type, dome, Spaceview, armored with yellow reflector. It is new old stock and in excellent condition. The crystal is stamped ACCUTRON. There is slight wear on the left side of the emblem. It measures 31.1mm in diameter and comes in its original paper sleeve marked A1271EY. (699-400) Price - $25 Refer to: #SM200 This is an original antique beveled glass for a carriage clock or picture frame. There is a rough edge top left and a tiny chip on the left corner and right edge, but otherwise it is in very good condition. The bevel measures 1/8". It measures 3 1/2" in length and 1 11/16" in width. (699-595) Price - $10 Refer to: #P209 This watch movement is Swiss and is signed FONTAIN HELBROS WATCH Co. It has 15 jewels and 2 adjustments. The minute and hour hands are present and the stem functions properly. The front plate is stamped 136 AS. The balance staff appears to be fine but the watch is not currently running. It measures 24.76mm long and 15.5mm wide. (699-400) Price - $20 Refer to: #SM158 This is an antique five-pane beveled glass with brass trim for an art deco wall clock. It can be also be used as antique window glass and used in decorative projects. It measures 9 1/4" in width and 10 3/4" in length at the center. The center oval measures 6" in width and 8" in length. The bevels are 1/4" thick. The glass weighs 2 lbs. 2 3/4 oz. and is in excellent condition with no chips or cracks. (1999-1495) Price - $40 Refer to: #P228 This Swiss watch movement is signed CATTIN-AUBRY. It has 15 jewels and 3 adjustments. The hour wheel is not present. The stem functions properly. The balance staff appears to be fine but the mainspring is either broken or not present. The watch is being sold for parts or restoration. The dial plate measures 23.5mm in diameter. (699-400) Price - $20 Refer to: #SM159  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This is a clock movement and dial from an antique French Bullseye clock. The white paper dial was most likely restored some time ago. There is yellowing in the center around the arbor holes. The glass is quite heavy. The glass and pan are probably original as the old grommets fit perfectly. The dial measures 9 7/16" in diameter. The movement was made by AD. Mougin and is stamped accordingly on the back plate. It is an 8-Day half-hour, hour strike with a countwheel. The suspension spring is broken and the pendulum and hands are not present. The movement is in very good condition and all three mounting brackets are present. (7999-1495) Price - $350 Refer to: #P156 This watch movement is signed BULOVA W Co. It is also stamped FAVRE W Co. It has 15 jewels and 3 adjustments. The stem is present and functions properly, however, the linkage does have missing teeth. The front plate is stamped E 40. The minute and hour wheels and cannon pinion are not present. The balance staff appears to be fine and the watch is currently running but has not been tested for accuracy or duration. It is being sold for parts or restoration. The dial plate measures 22mm in diameter. (699-400) Price - $25 Refer to: #SM160 The dial of this Swiss watch is signed UNIVERSAL GENEVE. It shows some wear and would benefit from a thorough cleaning. The minute and hour hands are present but the seconds sweep and shaft are not. The stem is present but will need adjusting as it will not stay in the set position but returns to the wind setting. The movement is signed SWISS UNIVERSAL WATCH Co. It has 17 jewels and is a caliber 263. The letters UOW are also stamped on the back plate. The balance staff appears to be fine but the watch is not currently running. The dial plate measures 27.07mm and is a size 12 Lignes. (699-400) Price - $55 Refer to: #SM188 This watch movement is signed LAVINA. It has 15 jewels and 4 adjustments. The barrel wheel is also stamped LAVINA 15 JEWELS. The minute hand is present but the hour hand and stem are not. The stem gear assembly is incomplete and one of the gears is loose. The balance staff is broken and the watch is being sold for parts or restoration. The dial plate measures 23.6mm in diameter. (699-400) Price - $15 Refer to: #SM167 This is a genuine Omega crystal and gilt ring, complete with special inserter. It is new old stock and in excellent condition. The crystal measures 29.6mm in diameter. The Omega emblem is stamped in the center of the crystal. It comes in its original plastic sleeve which is marked CRY# 979. (699-400) Price - $30 Refer to: #SM212 This is an assortment of four new old stock metal dials for wall or shelf clocks. Two of the dials have bezels and are for chime clocks. Two of the dials need arbor holes installed. The dials have slight surface imperfections from storage. The beige painted dial on the left is for a chime wall clock. It measures 8 1/16" in diameter. It measures 2" between the winding arbor holes center to center and 1 1/4" from the hand arbor hole to the center winding arbor center to center. Top center is a white painted dial for regulator or school clocks. It measures 9 1/2" in diameter. The bottom center ivory painted dial is for a westminster chime mantel clock. The bezel measures 5 7/8" with a 5" dial. It measures 1 3/4" between the winding arbor holes center to center and 1" from the hand arbor hole to the center winding arbor hole center to center. The dial on the right is a German box clock dial with a silver finish and black arabic numbers. It is 6 7/8" in diameter. (2499-1495) Price - $50 Refer to: #P220 This vintage pair of cuckoo bellows is in good condition. The pipes measure 3 7/8" in length. The bellow tops are 2 1/4" long and 1 1/2" wide. The pipes have no cracks. The bellow tops have old paper with no apparent tears or holes and they produce a quality sound. The tops employ a wire spring system to close, rather than the typical weight system used on newer bellows. The wires and hooks are present. This size is generally used in 8-day cuckoo clocks. (999-595) Price - $35 Refer to: #P227 The dial of this watch is signed TYL ANTICHOC 17 JEWELS. The black dial is in very good condition with some wear around the outside edge. The minute and hour hands are present and also in very good condition. The stem is not present. The movement is stamped 17 SEVENTEEN JEWELS. The balance staff appears to be fine but the watch is not currently running. The dial measures 19.5mm in diameter. (699-400) Price - $55 Refer to: #SM190 This watch stem is for a Hamilton caliber 989 18/0s movement. It is new old stock and in excellent condition. It is inventory from a retired watchmaker's shop. (699-400) Price - $15 Refer to: #SM191 This gold leaf watch dial is signed CROWN. It is in good condition and would benefit from a cleaning. The two dial feet are present and in good condition. The dial measures 27.25mm in diameter. (699-400) Price - $15 Refer to: #SM192 This is an original antique back cover for a shelf or mantel clock. It is painted brass and in very good condition. It opens and closes properly. The outside overall diameter measures 5 5/8". It requires a case opening of 5 1/16" for the inside ring to seat properly. This cover was used primarily on slate and marble clocks. (1499-595) Price - $35 Refer to: #P231 This lot includes eight clock movements. Moving from left to right on the top row, 1) This movement is for an alarm clock. The balance wheel assembly is present but it is uncertain if all movement parts are there. The plates measure 3 1/2" high and 2 5/8" wide. 2) This movement has several parts missing including the balance wheel assembly. It is also for an alarm clock. The plates measure 2 1/2" high and 2 5/8" wide. 3) The balance wheel assembly on this alarm clock movement is present but several other parts are not, including the mainspring. The plates measure 2 1/2" high and 2 3/4" wide. 4) The last movement in the top row is also for an alarm clock. Several parts are not present, including the balance wheel assembly. It measures 2 1/8" high and 2 3/8" wide. Also moving left to right on the bottom row, 5) This movement is signed FORESTVILLE CLOCK Co. TORONTO MADE IN CANADA. It is a time only movement and is currently running but has not been tested for accuracy or duration. The movement would benefit from a thorough cleaning. The hour wheel is not present. The movement plates measure 2 1/4" high and 2 3/8" wide. 6) This movement is for an alarm clock. Some parts are missing, including the mainsprings. The balance wheel assembly is present. The movement measures 2 1/4" in diameter. 7) This movement is signed BLESSING-WERKE WEST-GERMANY. It is currently running but has not been tested for accuracy or duration. The movement would benefit from a thorough cleaning. The face plate measures 2 5/16" square. 8) The last movement was also made in Germany and is signed SHEFFIELD WATCH INC. It is for an alarm clock. The plates measure 1 3/4" high and 2 1/8" wide. These movements make a nice addition to the workshop for parts or restoration. (999-1095) Price - $35 Refer to: #P230 This lot is an assortment of three clock wind-up keys. They are in excellent condition. The key on the left is a double end #8 and is stamped INDIA. The winding side measures 4.25mm and the fast and slow side measures 1.75mm. The brass key in the center is stamped 13. It is new old stock and measures 5mm. It is a single end. The key on the right is a double end #4 and is stamped INDIA. It is also new old stock. The winding end measures 3mm and the fast and slow end measures 1.75mm. (699-480) Price - $12 Refer to: #P242  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge  Click Image to Enlarge This pocket watch was made by the Illinois Watch Company. It is an open face style with a pendant set movement. The decorative dial is signed ILLINOIS. It is worn and would benefit from a thorough cleaning and some restoration. The minute hand is present but the hour hand and seconds bit are not. The stem functions properly in the set position but will need some adjustment in the winding position. The silver case, with engraved edging, is in good condition with some wear. The back is engraved with the letter A. The inside back cover is signed WATCH STAR CASE COMPANY STELLAR. The case serial number is 6756547. The crystal appears to be a replacement and is in excellent condition. The movement is signed ILLINOIS WATCH CO. SPRINGFIELD. It has 15 jewels and appears to be a model 7. The serial number is 3059395 which dates the watch to 1917. The balance staff appears to be fine and the watch runs and stops. It appears to be a size 10. (1999-665) Price - $65 Refer to: #SM204 This is a genuine Bulova waterproof acrylic watch crystal. It is for an Accutron and is Armored White. It is new old stock and in excellent condition. The crystal measures 33.6mm in diameter. It comes in its original paper sleeve marked 316AW. (699-400) Price - $45 Refer to: #SM216 This is a genuine Bulova waterproof acrylic watch crystal. It is a snap-in type, dome, Spaceview. It is new old stock and in excellent condition. The crystal is stamped ACCUTRON and the minute markers and emblem are also in excellent condition. It still retains the original sticker on the crystal, designating the size at 30.55mm. It comes in its original paper sleeve marked 1210E-3. (699-400) Price - $45 Refer to: #SM207 This is a set of two Bergeon plastic oil stands used to hold watch and clock oilers. They are in excellent condition with no splits or cracks. One stand is missing the metal bottom ring used to weight it down. The stand with the weight has a slight hairline on the base. They are 1 1/2" high. The base on both stands measure 1 1/2" in diameter. Both are stamped BERGEON SWISS MADE.(699-480) Price - $20 Refer to: #SM208 This lot includes 50 watch crystals. They all appear to be new old stock and are in excellent condition. They are from Rudolf Flume. Forty are ordinary, domed, waterproof acrylic crystals, ranging in size from 15.2mm - 32.8mm. The other ten are high domed and waterproof, ranging in size from 17.6mm - 38.4mm. (699-665) Price - $45 Refer to: #SM220 This lot includes 29 watch mainsprings. They all appear to be new old stock and are in excellent condition. They are from Rudolf Flume and include a variety of sizes. Two of the boxes contain three springs each. (699-665) Price - $55 Refer to: #SM215 This poising tool is used for truing watch balance staffs. It is stamped FRANCE. It is in very good condition with some wear and corrosion around the nibs. It would benefit from a thorough cleaning. The thumb screw and spring, which spreads and closes the tool, operate properly. (699-480) Price - $30 Refer to: #SM219 This is a Synchron, model 610, clock motor. It was made in the U.S.A. and is used but in excellent condition. When plugged in, it operates smoothly and quietly. It is rated at 110 volts, 60 hertz, 3 watts and 1 rpm. The motor is type A43RA-6. Holding the motor, in a position facing the 10 tooth gear, its rotation is clockwise. (699-665)
Price - $45 Refer to: #P243 |
Research Requests | Shipping Information | Payment Options | Contact Us | Policy Page